The influence of the waveguide on the quality of measurements with ultrasonic Doppler velocimetry

The article is devoted to the study of the influence of geometric parameters of sound-conducting walls on the quality of measurement of liquid metal flow velocities by ultrasonic Doppler velocimetry. It was shown that the thickness and radius of a sound-conducting wall (waveguide) have a notable effect on the resulting velocity profiles. The flow in a round pipe, the length of which is much larger than its diameter, is considered as a reference flow. The positive effect of a stepwise waveguides with a diameter smaller than the diameter of the piezoelectric element of an ultrasonic transducer on the quality of velocity measurements was verified experimentally. It was found that the accuracy of the resulting velocity profiles largely depends on the length and the material of the waveguides, as well as the velocity of the incoming flow of liquid metal.     

水泵水轮机导叶动态水力矩特性分析

采用SST k-ω湍流模型对某高水头水泵水轮机进行全流道三维非定常数值模拟,分别对在水轮机工况和水泵工况运行下的导叶动态力矩特性进行分析。结果表明:在水轮机工况下,随着流量的增大,不同位置处导叶的动态水力矩变化规律一致,力矩值由正值变为负值,力矩脉动频率与转轮叶片数相关,流量越大,叶频影响越显著;在水泵工况下,最高扬程工况时导叶水力矩脉动频率主频为转频且脉动幅值较大,而最低扬程工况下导叶水力矩脉动主频为叶频,力矩脉动幅值较小。     

天然气新型气液分离器性能试验研究

为了解决天然气含有饱和水汽和少量烃降低输气效率、堵塞管线和设备等问题,利用旋风子、稳流元件、叶栅式分离元件、折流板式分离元件组合成新型天然气分离器。利用相位多普勒粒子分析仪对新型天然气分离器进出口粒子粒径与液态水含量的进行对比测试,以研究新型分离器的分离效率。结果表明:新型分离器具有良好的气液分离作用;在流量为10～64 m~3/h时,分离器的分离效率成抛物线形式,在33 m~3/h时分离器的分离效率降到最低值95.16%,主要原因是流量在33 m~3/h时,试验气液混合不均匀,导致内部流态紊乱,以至于试验测得分离效率相对偏低;在流量为10 m~3/h时分离器分离效率最高,为99.29%;分离器对该进口条件的气体中雾状液粒有较高的分离作用,且可以明显降低分离器出口气体中液粒的平均粒径;从进口到气相出口压力逐渐降低,总压降为950 Pa;流动区域速度梯度大不利于气液相分离,流动掺混会导致分离效率降低。     

锅炉二次风道流动特性的模拟优化

以武汉武锅能源工程有限公司设计的二次风道为对象,运用数值模拟的方法考查了改造前后二次风道各出口空气的速度分布和质量流量分配情况。结果表明,通过布置弧形挡板,风道出口速度的均匀性显著提升,最大变异系数Cv由29%下降到9%,而且还避免了因风速不均引起的烧边现象。此外,改进后风道各出口空气的流量分配非常接近理想工况,与理想工况的偏差从9.9%缩小到2.1%。     

Comparative analysis of Cu/blood and Cu–CuO/blood nanofluids on a peristaltic flow governed by an asymmetric channel

Contraction and expansion play a crucial role in biomedical applications, such as heart pumping, ovum in the feminine fallopian vessel, blood fluid transport, and so forth. Inspired by these features, the present effort concentrates on the consequences of a thermal slip in the peristalsis of Cu/blood and Cu–CuO/blood nanofluids in asymmetric flow formation. Hence, the microrotation influence of blood flow is considered here. Heat transported through the channel due to perpendicular flow buoyancy effects is also studied. The special effects of thermal radiation, nanoparticle shape, and heat source/sink parameters on the flow are studied in the proposed model. The MATLAB BVP4c condition is utilized to achieve the numerical solutions of the transformed system of nonlinear coupled differential equations. The most important outcome of the present analysis is an enhancement in the evaluation study of the Cu/blood and Cu–CuO/blood nanofluids on the axial velocity, axial spin velocity, pressure gradient, and temperature distributions in the asymmetric channel. Also, another important outcome is observed that the Cu–CuO blood nanofluid strongly has dominated the Cu/blood nanofluid in axial spin velocity.     

Process and joint quality of ultrasonic vibration enhanced friction stir lap welding

In order to improve the process effectiveness and joint quality, ultrasonic vibrations were integrated with friction stir lap welding. Effect of ultrasonic exertion on the process and joint quality of AA 6061-T6 were investigated. Upon ultrasonic exertion, joints owned larger effective lap width, shorter hooks and improved strength. Weld fracture mode changed from a ductile–brittle mixed mode to a more ductile mode while the fracture path shifted from lap interface to beyond the stir zone. Material flow and interface defects were characterised using lap welded dissimilar aluminium alloy joints. Ultrasonic vibration improved the material flow and reduced the interfacial defects. Variations in failure load of joints were found in accordance with the variations in material flow and interfacial defects.     

LTE室分高倒流小区解决方案的研究

LTE室分高倒流直接影响室内4G用户的感知，同时较大程度拉低LTE网络驻留率指标。由于室内无线环境的封闭性，室分小区之间的覆盖独立性，仅仅通过参数调整的手段达到降低高倒流的效果非常不明显，因此本文针对目前影响室内用户感知的高倒流问题，从高倒流小区的标准出发，对室分高倒流小区的发现手段，产生原因及解决方案进行详尽地阐述，并针对各类型的高倒流情形提出解决方法，最终提供读者发现、分析及解决室分高倒流小区的有效方案，从而作为研究方法提供给LTE室内小区高倒流问题解决的指导意见     

浅谈煤与瓦斯突出矿井"U"型通风系统采煤工作面上隅角瓦斯管理

屯兰煤矿是煤与瓦斯突出矿井,瓦斯涌出量大,上隅角瓦斯治理困难。为解决这一通风难题,该矿采取沿空留巷抽采措施进行作业。实践证明,该技术解决了上隅角瓦斯积聚隐患,保障了矿井高产高效。     

黄河什四份子弯道冰期水流及冰塞特征研究

覆冰条件下,弯道水流固有的三维特性更为复杂,对河流弯道冰下水流特征及冰塞的研究有助于推进防凌减灾工作。依据2020年1月稳封期的原型观测数据,对黄河什四份子弯道冰下水流及冰塞特征进行了详细分析。结果表明,弯顶节点工程引起的回流是阻冰的重要条件,上游下潜的冰花因水动力不足及河势等因素影响发生堆积,冰塞在弯内形成并沿凹岸主槽逐渐向上游发展,同时,弯顶卡冰封河与下游较大的水流流速,促进了清沟的形成;入弯至弯顶区间,冰下水流流速垂线分布基本服从双对数分布规律;受凹岸冰塞及回流影响,纵向上,水流流速呈减小趋势,在弯顶附近开始恢复;径向上,河道主流被冰塞压迫并逐渐趋于凸岸,致使弯道主流易位,凸岸水流流速大于凹岸,清沟向凸岸偏移;弯道水流湍动能与雷诺应力主要在近底处存在较大的变幅,表明近底水流运动活跃,且二者大小与流速大小在径向与纵向分布上具有较好的一致性,受冰盖影响,水流湍动能沿水深近似呈"S"形分布,雷诺应力分布无明显规律。     

内插螺旋立式上行管流场及传热性能的实验研究

通过粒子图像测速流场实验与传热实验相结合，研究了内插螺旋立式上行管的螺旋节距、丝径、中径比等结构参数在不同Re下对流场、阻力及传热性能的影响。结果表明，内插螺旋能够有效扰动和混合管内流体，使管内形成多个纵向旋涡的流体结构、增大管壁附近液体涡量，有利于强化传热。当Re相同时，管内平均流速v、Nu和综合换热性能PEC均随丝径增大而增大，随中径比减小而增大；随节距增大，3种参数均出现增大的趋势，节距大于20 mm后开始减小。管内流体的阻力f随丝径和节距增大而减小，随中径比增大而增大。综合比较，在较低Re时，节距p=20 mm、丝径e=1.6 mm、中径比D/d=0.75时综合传热效果最好。